W-9D

The Weaver W-9D excels as a fully featured 9,000-lb. capacity auto lift with Super-Symmetric arms that allow asymmetric or symmetric loading, single point safety release and dual direct-drive cylinders.

What is Super-Symmetric and how does it load either asymmetric or symmetric?  This unique arm style utilizes 3-stage front arms and typical 2-stage rear arms.  The 3-stage front arms allow asymmetric loading when the front arms are near fully retracted and symmetric loading when the front arms are near fully extended.  Short enough for wide unibodys yet long enough to reach the frame on framed vehicles.   
 
This commercial grade 2-Post Lift also has dual height positions that allow for installation under a 12' ceiling or a second selection to raise the height to 12' 6".  Stack pad height adapters ( 1 1/2", 3" and 6") are also included to adjust pad heights for various vehicles including trucks.  Also included is a set of 4 Frame Adapters that are typically sold as optional equipment from other brands.
 
The W-9D is an overhead beam style clear-floor design with a padded shut-off bar for overhead vehicle protection.  The columns are positioned symmetric (straight) with Super-Symmteric arms that allow the most flexibility for loading either asymmetric or symmetric lifting points.   
 

FEATURES:

• Super-Symmetric (2 in 1) arms increase overall arm sweep and minimum arm reach to precisely lift vehicles
• Dual hydraulic direct-drive cylinders
• Single-point safety release allow technician to disengage both column simultaneously
• Self-lubricating UHMW Polyethylene sliders and bronze bushings
• Clear-floor design, provides unobstructed floor use
• Overhead safety shut-off device prevents vehicle damage
• Stackable adapters 1.5", 3", 6" are standard
• 4 Frame Adapters Included
• Standard adjustable heights accommodates varying ceiling heights
• Standard door guards and toe guards on lifting arms
• Automatic swing arm restraints
• Anchor Bolts Included

SPECIFICATIONS:

• Lifting Capacity: 9000 LB.
• Drive Thru:  97 1/2"
• Motor Rating:  3HP, 220V, 1 PH, 30A
• Overall Floor Width: 135"
• Overall Height 142 1/2" or 150 1/2"
• Lifting Height:  71" - 81"
• Low Pad Height: 4 1/4"
• Width Between Columns: 112 1/4"
• Shipping Weight:  1450LB.
• Concrete Requirement: 4" Depth, 3000 PSI Rebar Reinforced
• Base Plate:  15 5/8" X 17 5/8"
• Lifting Time: 50 Seconds
• Hydraulic Oil - AW32 or AW46
  

5-year structural warranty, 1-year hydraulic cylinder and 1-year warranty on power unit.  Affordably priced for the commercial shop or enthusiast garage.