- Tire Changers
- Wheel Balancers
- Car Rotisserie
- Shop Equipment
- Weaver Wear
Weaver W-Vise is a complete wheel vise package. This Rubber-Lined vise kit includes mounting hardware and rubber pad protection across the entire inner surface.
Free Shipping within the lower 48 states.
The Weaver W-Vise is the same rubber-lined wheel vise kit that comes standard with our W-1500 motorcycle lifts. The front wheel vise will fit many applications including other lift brands, trailers, work benches, etc… Our easy to use crank and rubber lined sides help protect your wheels and provide better stability for the bike.
Hardware and wheel stop included. Some drilling to mounting surface may be required. Typical installation is 9" between inside bolt holes measuring across both sides. The inside front bolt hole of the stationary side ususally lines up directly across from the inside rear bolt hole of the adjustable side. However you can widen or narrow as needed.
Straps should be used in addition to the vise for a safe operation.
Posted by Jack Quigley on 20th Sep 2016
The wheel vise fit perfectly on my existing lift. It is a quality device that should outlast the lift itself. I was please to see that the rubber covers on the inside of the vise were screwed on and not just glued. I couldn't be more pleased.
Posted by Don Hilston on 6th Sep 2016
mounted your vise on my lift, no problems all hardware included, piece of cake. nice unite should do the job with ease. thanks
Posted by mike on 4th Aug 2016
This works perfectly. It puts the bike ,with straps, completely
Posted by ZJS on 22nd May 2016
This vise is sturdy and does the job I needed to hold the bike upright until I can tie it down to the lift. Feels strong. The plastic plugs could be made to fit better, since the ones I got fit really loose. Nothing some epoxy couldn't fix to keep them in place.
Posted by Jerry on 5th May 2016
Product arrived quickly. Could not be any happier with the Vise.
Posted by Unknown on 28th Mar 2016
Bought this to put on my automotive lift so I can work on my bike on the lift. Good solid setup and design. Can't beat the price.
Posted by DonMack on 9th Mar 2016
Some background: I am a 74 yr old rider, who has always suffered from a very short pair of legs... 28.5" inseam, which makes many simple moves such as getting a "man-size" bike up and secure on a lift table more difficult.
The lift table I purchases from a competitor came with a really cheesy wheelvise, so I purchased one of the "flip-up" lifts where you push the bike into the cradle, it flips up behind the tire and holds the bike (somewhat) securely. The problem with this clamp is that it is too loose for a 120/70 front tire, allowing too much side play while climbing off the bike to secure it with the tie-downs. The REAL problem for my short legs came when I discovered I couldn't generate enough rearward force to get the bike back OUT of the clamp!!! Turned it into a 2 man job... No es bueno!
Your vise arrived on time. The parts inside had managed to hole the box in two places... I checked, and the plastic bag of small parts was there and undamaged, and the heavy duty metal pieces were essentially undamaged as well, having been originally wrapped in layers of "bubble wrap". It was the corner on a couple of pieces that had worn through the bubble wrap, then chafed through the box in two spots... No harm, No Foul1
The only minor complaint I have is that the molded rubber close-out plugs in the rectangular tube wheel supports all fit loosely, one had fallen out in transit. Easily corrected with some black RTV on the plugs, with a strip of duct tape to hold it firmly in place while the RTV set up overnight.
Very HD wheel vise, which should serve me well for years. I would happily recommend this vise to anyone who asks!
Posted by Bill on 7th Mar 2016
Posted by Unknown on 21st Oct 2015
Shipped fast install was easy.
Posted by Unknown on 12th Oct 2015
I installed this on a harbor freight lift very big improvement