Weaver® W-BlackJack Motorcycle Jack

Very versatile love the multiple adaptors to facilitate smoothly picking up bike or 4-wheeler.

I have not used it, but it seems to be a sturdy, high quality jack.

This is a heavy duty quality jack with plenty of options. Compared to others on the market this is the best bang for your buck and will work on just about any motorcycle. Highly recommend!

I use this on my 1996 Heritage Softail. Works very good with getting both tires off the ground at the same time. Stable enough that you don't have to worry about your bike come crashing down while you work on it

awesome jack built solid

I use it almost every day in the shop it’s a good jack for the money.

Nicely made jack. Nice price and works really great. Like having the option to lift the whole motorcycle or just the front or the rear.

the lift is very well built nice and heavy it was really worth the cost over the cheap ones i used it on my Indian chief with no problems. the only thing i would like to see changed is two stops put on the flat plate so you could get it where you need it and keep it there. so i will do that myself. but other than that i plan on using this thig for a lot of years to come.

Real nice: very strong, well built. Should have bought one years ago....

this motorcycle jack is great works very well

Actually surprised to receive shipping notice on a weekend,and delivery was quick. After reading some online reviews of the lift,knew what to expect and followed the advice to lube up the threaded rod. Like the versatility of the jack,the various pieces make it a great accessory to my main lift. Before buying a cheaper unit,give this one a look, worth the couple of extra bucks.

Heavy, solid construction. No wobble.

thanks

good quality, should come with socket or handle to raise and lower considering the cost

Very Nice product Does just as good as a 300.00 lift very HD works great...... I just wish I can find one that's 2.5 tall but this one is top notch

I rolled my lowered RoadKing on 2X6's to get the jack underneath. It is a great jack, very stable with lots of attachments to fit anything. I would highly recommend this jack for any type of work.

Nice product

Perfect compliment to my lift table. If you are getting a Weaver lift table, Just add this jack to the order very heavy duty. Only caveat, the lifts ballscrew and thrust bearing needed to be greased before first use. But that is a small enough a job

Solid and easy to work with nothing bad about this jack it will lift anything you put on your lift

Heavy duty unit not like the cheapo ones on EBay. I don’t know if the K&L is that much better for another $100. Great nylon standoffs in 2 lengths plus 4 shorties that mount to the robust 1/4” plate. Other Comments- Grease fittings would be nice. Rollers are steel on steel and could rust up if exposed to moisture. Rubber pad on top would be nice. DO NOT USE an impact gun to raise and lower. This should be stated in the instructions which are not included. I use a speed wrench with a 24mm deep socket. This unit could use a handle as it is heavy. I am making a wall rack to hold the jack and all the accessories, lots of parts to loose. All in all, this jack is one of the best on the market for the money.

I'm very pleased with my purchase of this product. When the box arrived it felt rather heavy and that's only because the product inside was well built of heavy steel. This Jack is easy to use it goes up and down easily and it's made rather well also. I purchased this product to compliment my lift. This Jack comes with everything you'll ever need to raise your motorcycle up or down. This is the second product that I have purchased from Weaver lift and I will do more business with them because their products are well made and work great. Bottom line I will purchase from Weaver lift again because their products are true.

High quality, very sturdy and very versatile with the added attachments. great value.

This jack is not the same as the cheaper similar garbage on amazon. This jack is almost as good as the K&L version. It feels as sturdy as the and functions the same as the K&L. The only difference is that the K&L version bearings feel a tad smoother when the jack is not under load. I will be buying these instead of the K&L from now on.

Very stable. Stood up well to brake fluid

Product is as represented. Good fit & finish Time will tell on longevity & quality.

Awesome jack well made easy to use

it was worth the price too insure that bike does not fall of the jack and well built

I am pleased with the Blackjack motorcycle jack. IT is all that i expected and much more.

This Jack setup is awesome. It allows me to work in of wide variety of motorcycle's with ease. Paired with the 1500lb lift my shop is ready for any kind of ATV or motorcycle. Thanks again derick weaver for an excellent product...

This lift is easy to set up.The 4 point lift base is perfect for tire change stability and scissor lifting power is good. A good purchase

My 1951 HD EL Panhead sits low to the ground. This jack will fit under the frame (with rear tire inflated) without a problem. Great for when I have to lube the chain and/or clean the back wheel. Very heavy duty and stable when raised.

I wasn't sure what to expect when I ordered this jack along with my TX-1000. There were cheaper ones but with less features at Amazon but this got good reviews here. On my gosh, this thing is much heavier (not a bad thing) than I was expecting. It feels like I could lift up my car with it. So far I haven't needed any of the attachments but I'm glad I have them. Anyway, very pleased with the jack and I'm confident I can lift any motorcycle with the supplied attachments.

Jack works very well.steel bearings make lifting heavy bike easy. Should last many years. All accessorys made of heave have steel.

What an easy and inexpensive way to address the safety and security of our staff. EASY to use. Simple and safe. Awesome risk management tool. Have 2. Getting more! KM

Amazing jack I love it picks up my Harley with no effort and is extremely stable.

Perfect

Best jack out there for the money.

LIKED EVERYTHING ABOUT THIS JACK! PRICE WAS VERY FARE !

This is the second jack I have purchased from you because I was very pleased with the first. Good quality at a good price.

For the money it is excellent - just wish the surface wasn't so slick - the powder coating gives no traction when the Motorcycle is in the air and is easily slid from side to side. You should have included sand strips or rubber strips to keep the bike secured.

An awesome way to lift your motorcycle with any of the attachments that are provided with this package. It will give you years of useful use. Works Great!!!

I feel this jack is the best out there for the money. Hands down.I leaned about this jack through a friend who has a bike shop he has not had any trouble out of them. His newest one is probably 6 years old and used a lot. Thanks.

We have been using the Black Jack for years and continue to buy more for new employees.

Works good. Be nice if it had a removable handle. Big time saver though.

Used it to pull a engine and install one with ease. Love the thing

A versatile way to lift your motorcycle or ATV with any of the attachments that are provided with this package and in doing so in a safe manner!! Will give me years of useful use. Great!!!

Great product and heavy duty, handled my job with ease. I'm very satisfied

I concur with every good review I had read on this. Some said that it would have been nice if it had some sort of rubber grip pad on it. I used a black rubber like barbeque/grill matt. I cut it to size and epoxied it to the flat surface and PRESTO! I HAVE A NO SLIP SURFACE!

Great price and great quality. This is the second one i have bought. The first one is about 5 years old and works just like the brand new one. You can't beat this jack for the money.

The quality of the jack and adapters far exceeded my expectations. They work well and make my lift table more versatile. A good product at a great price!

Works great and plenty of flexibility whether you are working off the floor or a lift. After you get it, don't forget to come back to the website to look at the pictures, there wasn't much in the box for setup.

Great product for the money spent

The motorcyle Atv lift was better than I thought it was going to be.

Just what I expected from Derek Weaver.

Great jack. Good quality. Works as advertised. Lifts the entire bike off the floor so you can do maintenance or wash both wheels (spin them) easily. Jack placement on the frame to get perfect balance for both wheels off the floor takes a little effort. My Softail weighs over 700 lbs. Jack is rated at 1000 lbs. Its a great bang for the buck. I recommend it. When I have more cash, I'm buying a table and I can use this jack on the table too.

Don't know how I've gone all these years without this tool. From routine maintenance, to simply cleaning the wheels, the BlackJack lift makes it so much easier, especially with my H-D dresser. I work at a Harley dealership and I had to have one when I saw one of the techs using one. One hint - It really helps if you have a 1/2" socket wrench with an extra-long handle to reduce the reach required the operate the jack. I highly recommend the BlackJack to any DIYer out there!

Very stable even towards the ends when at full height, well made and smooth operation under load. Would buy again.

The lowest plastic blocks were not thin enough for my Lowered Road King Classic Custom,I cut them in half, re-threaded top portion and Cut grooves with a half round file into the bottom halves, worked perfect. Great Jack though.

Works very well for my lowered Street Glide, some instructions would have been nice.

This jack comes with all sorts od adaptors for I'm guessing all sorts of motorcycles. It did not come with any instructions. It is easy to use and very strong and sturdy.

wish I bought these sooner. Great product for the price.

I bought the Blackjack motorcycle jack to raise my 700 lb '98 Valkyrie. The jack is strong, well-made and easily cranks up under a load. Using the jack with a lift adapter, the Valkyrie is reasonably stable once off the ground. This is a good product at a good price.

This is my 2nd Blackjack, the 1st I got back in 2008 for a Big Bear kit bike build. It was & still is top quality with stainless steel rollers that this 2nd one doesn't have, still has good quality, not as good as the 1st. The wide top plate attachment doesn't fit tight like the 1st jack either. I do recommend this jack over "Drag Specialties' center jack", I also got their "Direct Lift chopper bike lift" Great buy!

Very good quality, wider than it looked in the pictures. Picks up the goldwing easy and it is very stable.

Super company to deal with - recommend this company to everyone.

Really happy with this jack. After receiving it and looking at it in detail versus others I've seen at local shops, this one in general seems to be better quality, heavier duty, and comes with accessories that others do not offer.

The W Blackjack is an impressive jack. It is more substantial than the pictures suggest. Heavy gauge steel, wide deck, and large adapter plate.2 sets of inserts for the slide on adapters give it wide range of fitment. Very happy with product and service,

For my purpose this product is just what I need. I am NOT a professional cycle mechanic but, I do most of the maintenance on my cycles. With my Heritage Soft Tail being so low, the adapter plate will fit under the cycle without spacers but that is not an issue. The jack with the large adapter plate without spacers fits very nicely under the cycle. My 79 Low Rider is high enough for the use of all the adapters and spacers. For the money this is a very good product.

No complaints with this jack, lifts my bagger with no problems and seems pretty stout.

I ordered my second Black Jack and had some missing parts. I was amazed to receive an email on Sunday and was shipped right away. Can't go wrong with the Derek Weaver company.

I have only had this jack for one month but I can definitely vouch for it. Was delivered fast, well built and works just like you would expect it to, all and all worth the money spent

I have only had this jack for one month but I can definitely vouch for it. I have a Vulcan m/c that does not have a flat spot on the bottom of frame. With the 11" plate and 3 sizes of adjustment pegs, you can use this product on any motorcycle. Highly recommend.

I just got the Blackjack and I'm using it on my motorcycle lift. It works really well to lift front or rear of the bike- plus I can set it so the tire will be sitting on the lift, making axle installation a lot easier. OR jack it way up for access/taking stuff off. I've only used the two small clamps with vertical plastic posts so far. They worked quite effectively. The large plate could be good for many applications, or even just a rubber piece on the jack top itself.

Great simple functional perfect space saver for storing bike

I bought one about 2 yrs. ago great 4 lifting as well as standing up straight to fit accessories such as hiighway peg mirrors etc.many bikes in sm.garage great to store on saves space.

I now have 4 of these jacks and for the price, can't be beat! 1 of these are 7 years old and with a little maint. it has out done the more pricy ones I have. Good Product, good Service, fast delivery and great folks to work with.

Works great on my ATV's and motorcycles.

For years I struggled with a hydraulic floor jack to raise my bikes on or off the Handy-lift. Raising the middle or end of the bike was a balancing act using a thin board to distribute the force. Jacking causes the floor jack to move and that upset the balance, so every lift had some concern about drop-off. At my son’s shop I saw his W-Blackjack used on and off the lift. I was sold. I use the W-BJ on my Handy-lift and sidecar projects. It works great. Solid footing and I can choose from the plain flat platform or drop in the correct nylon frame adapters for a safe and secure lift. Great product, great value for the price

Was delivered fast, well built and works just like you would expect it to, all and all worth the money spent

Great tool for the job right and secure

this is an awesome jack for the money. not sure there is a better one .honestly. this comes with an adapter plate,jack brackets and 2 types of standoffs. it has just the right size feet on the base to keep stable if you wanted to use it inline instead of across.it definitely durable. I left my lowrider on the stand 10 inches up without the rear wheel on it for almost a week and the jack screw didn't strip out.so I know its trustworthy, especially for the 1000lb rating. I am VERY pleased. the only thing that could improve it is a hold pin for the bottom of the scissor. but its not really necessary

I bought two and they work great. I have used them on a tube frame Buell, a Sportster, and a Dyna so far and they work perfect. There were a few folds of metal on the nut that prevented me getting a 15/16 socket on, a few seconds with a file fixed that.

I bought this jack to use on my hydraulic lift when I need to jack up my vintage bikes. The assorted hard plastic adapters work great on tube cradle frames where exhaust pipes or other parts prevent direct access to the frame with a flat topped jack. The jack is very heavy and seems to be very well made. My only complaint would be that the pivot points and threaded rod only come lightly oiled. I disassembled my jack and greased all the points. I fully expect this jack to last a lifetime.

I shopped locally as well as on the Internet, This jack rocks. Whether you are jacking a HD to take off the Tire or a sport bike with pipes running under frame, this jack has the accessories included to make the job a snap. Glad I found you guys!

Awesome Jack for the price!!

I am using the jack right now and it is doing the job that I intended for it. Great price, good product.

This is my second one I have purchased from DW and I have been very pleased with the quality and performance, not to mention the price!

be sure to put some nice heavy grease on the threads and bearings. Works great on cruisers, choppers, quads, and dirt bikes. I'm very happy with it, especially for the price.

Solid jack! Looks like it will be a necessary accessory for my lift. A couple of small issues, the box wasn't packed tight. it tore open and some of the hardware was missing. It does not come with a handle to crank it up. I can adapt.

Prefect!

AAA+++

excellent,very solidaaa+++

fast delivery, works great