The Weaver MC/ATV Adapter (W-C-M-0400000) includes 4 jaw chucks that fit over the standard clamping jaws on the W-890 Series (W-893 / W-894X / W-894XS / W-898 / W-898X / W-898XS) car/truck tire changers thus converting the machine to allow coverage for motorcycle and ATV wheels. This adapter extends the capability of our car/truck tire changers to allow the largest range of coverage and flexibility.
By adding the optional W-C-M-0400000 MC/ATV Adapters to a W-898XS it will open to 30" when clamping from the outside of the wheel. This means you could likely do most 28" wheels depending on the flange thickness and how that effects the overall diameter of the wheel.
By adding the optional W-C-M-0400000 MC/ATV Adapters to a W-894XS it will open to 26" when clamping from the outside of the wheel. This means you could likely do most 24" wheels depending on the flange thickness and how that effects the overall diameter of the wheel.
NOTE: Each Claw must be unscrewed to revert direction of clamp (2 screws per claw).
If you have any of these machines, you can extend your services to include these profitable wheel and tire changes by adding this adapter set.
Be sure to check the specification tab on this page to see the clamping range (distance between clamps) you will gain for each machine by adding this adapter set.
- W-893 / 894 Series using inverted position: 6.75"-19"
- W-893 / 894 Series using reverted position: 13.75"-26"
- W-898 Series using inverted position:10.25"- 23"
- W-898 Series using reverted position: 17"-30"
W-6003157 - Replacement Part for plastic claw protectors
Note - the bead blaster will be out of position to assist seating the beads when using this adapter set.