Warehouse pick up price Now ($2149.00). The W10-HD Weaver® Lift is a Loaded Full Featured 10,000-Lb. Capacity 2-post lift with Super-Symmetric 3D arms, single point safety release, commercial grade arm restraint locks and dual direct-drive cylinders. Oversized carriages spread the load out across the W10-HD's tall two piece column to reduce the overall load on the lift. Also Included FREE for a limited time, a set of 4 Saddle Adapters W-P20802-4 U-Shaped Frame Adapters for a Very Complete Adapter package!
Free Shipping To Over 85% of the USA - See Where It's Free
What is Super-Symmetric and how does it load either asymmetric or symmetric? This unique setup utilizes offset 3-Stage front arms and typical longer 2-stage rear arms. The offset 3-stage front arms allow the front arms to fold back (pointing backwards) for easy asymmetric loading. For symmetric loading just spread the front arms open (pointing frontwards) which also allows for wider tread widths. Short enough for wide unibodys yet long enough to reach the frame on framed vehicles. Stack pad height adapters (1 1/2", 3" and 6") are also included to adjust pad heights for various vehicles including trucks. Also included is a set of 4 Frame Adapters that are typically sold as optional equipment from other brands.
The W10-HD is an overhead beam style clear-floor design with a padded shut-off bar for overhead vehicle protection. The columns are positioned symmetric (straight) with Super-Symmteric arms that allow the most flexibility for loading either asymmetric or symmetric lifting points.
States Derek Weaver, "Quality, Durability and Affordability or it wouldn't wear the Weaver® Lift label. This is an extreme value when compared to the prices some companies want to charge. Get more here and Get It Up".
- Super-Symmetric (2 in 1) arms increase overall arm sweep and minimum arm reach to precisely lift vehicles
- Dual hydraulic direct-drive cylinders
- Single-point safety release allow technician to disengage both column simultaneously
- Self-lubricating UHMW Polyethylene sliders and bronze bushings
- Clear-floor design, provides unobstructed floor use
- Overhead safety shut-off device prevents vehicle damage
- Stackable adapters 1.5", 3", 6" are standard
- 4 U-Shaped Frame Adapters Included
- 2 height settings to accommodate taller vehicles
- Standard door guards and toe guards on lifting arms
- Automatic swing arm restraints
- Anchor Bolts Included
- Lifting Capacity: 10,000 LB.
- Drive Thru: Asymmetric approx. 86" Symmetric 98"
- Motor Rating: 3HP, 220V, 1 PH, 30A
- Overall Floor Width: 135 7/8"
- Overall Height:142.5" or 150.5" (Requires minimum 12' Ceiling)
- Height to Overhead Shutoff: 134" or 142"
- Lifting Height: 71.5" - 80.5"
- Low Pad Height: 4"
- Width Between Columns: 112 1/4"
- Shipping Weight: 1650-LB.
- Concrete Requirement: 4" Depth, 3000 PSI Rebar Reinforced
- Base Plate: 17.5" x 19.5" x 5/8"'
- Column & Carriage Thickness 5mm
- Arm thickness 6mm
- Lifting Time: 50 Seconds
- Long Arm Range: 37.25" - 58"
- Short Arm Range: 24.25" - 42.25"
- Hydraulic Oil - AW32 or AW46
5-year structural warranty, 1-year hydraulic cylinder and 1-year warranty on power unit. Affordably priced for the commercial shop or enthusiast garage.
Bleeding 2-Post Direct Drive Lift Cylinders
Rebuilding a Push-Style Cylinder
Rebuilding a Push-Style Cylinder
Power Unit Wiring for W-9D & W-10C
90 Second Know How: Filling and Bleeding a 2 Post Lift
In 90 seconds learn how to fill and bleed a two-post lift ©20...
2 Post Lift Daily Inspection: 90 Second Know How
In 90 seconds learn how to perform a daily inspection on your ...
11 Reviews Hide Reviews Show Reviews
Lift works very well, had no trouble lifting my 2010 f350 crew cab long bed. installation instructions are not well written, I assume if you are buying a lift you are fairly mechanical and wont have any issues figuring it ou
Lift works well. I like the single point safety catch release and the direct drive cylinders. I had to make a holder for the frame adapters to mount to the upright post. Also the upright that was packaged and shipped on the bottom was scratched pretty badly when I got it. Other than that I like it.
Solid unit. It has a good raised height for a 6' person to work under. I would definitely buy this lift again!
very pleased with the lift and the service.. pricing was very resonable for a quality lift.. cameron done a fine job of getting it here for me on time thanks Bruce
We bought a 10,000 lbs lift and let me tell you, it iseems hands down the best decision we have made. The lift was packaged extremely well and you can see the amazing craftsmanship. We installed the lift ourselves and has had no issues lifting our commercial customers trucks without the arms deflecting any at all. We love the safety features. The lift goes up and down the same speed no matter what kind of vehicle we have are lifting. Great purchase and even better quality than we expected.
The order went very well, and the shipping was quick. I installed it myself and the instructions were good on the installation.
It is a good solid lift.
I use this for everything. I had a Ford F-350 dual l replaced a transmission in, a 4x4 I will buy more
I been researching lifts for the past 5 months. Its clear this lift is the best value in the 2-3K range. Comes with more accessories than most of the others. Installed myself with a little help to stand post and put the brace across the top. Everything went smooth. It works very well. I have several vehicles on it so far. The heaviest being a 2500HD long wheel base and its just as sturdy as with a VW jetta. If I stay busy I will buy another just like it.
I am very happy with my purchase. Strong and sturdy. I have used it on everything from a diesel crew cab on down to a yaris.
I spent a month researching lifts and finally decided on the 10C. I failed to find any negative reviews on Derek Weaver. I have installed and used the lift. Works great. Installed by myself other than standing columns. The lift is heavy built. Lifts fast with full size vehicles. I've had a Mercury Marquis and a F 150 on it and it worked great. The extra lifting height is great for us tall folks as well, I'm 6'4".
Only used a few times so far but seems to be a good and well built lift. Have 2 bendpacks and another lift off-brand lift and this one seems to be comparable to the bendpacks. The customer service is awesome and I will definitely buy from derek weaver company again. They always answer quick and always helpfull. Could be a little better instructions though.
Derek Weaver Company is proud to offer our high quality products with free shipping or warehouse pickup. Here's how it works...
PRODUCTS MARKED FREE SHIPPING
All Products on our website are offered with "Free Shipping". This means the freight charges are included in the price. Most of our products weighing less than 800-lbs. are offered with “Absolute Free Shipping” which means there are no extra fees. In this case you will notice the phrase “FREE SHIPPING! Includes Free Residential and Free Lift Gate Service!”, in the description of the products page. Absolute Free Shipping also means there are no additional fees for Liftgate Service or Residential Delivery. The only additional fee that you may incur would be if the address were changed during shipment which would incur a reconsignment fee by the freight carrier that we would only pass on if it were not our mistake.
For equipment over 800-lbs (most 2 & 4-Post lifts) there are some limitations for Free Shipping depending on weight and delivery location. In this case you will notice the phrase “Free Shipping To Over 85% of the USA - See Where It's Free” in the description of the products page. Most of the USA will require no additional fee. This applies to over 85% of the continental USA (lower 48 states). Free shipping does not apply to Alaska or Hawaii. Some parts of the country are affected by higher freight rates due to the combination of weight and delivery location which will require a small additional charge to cover the higher rate charged by the freight carriers. Our shopping cart will not calculate the difference (added fee), so we will contact you if this is the case. Rather than advertise the higher rates across the board we choose to show the lowest possible cost to most of the country. Like “Absolute Free Shipping” there will be no extra charge for lift gate or residential delivery. The following areas may have additional freight: North Western US, North Eastern US, Long Island, Western Colorado, the Dakotas, some parts of Florida & California and any area deemed a remote location by the freight company. Prior to ordering give us a call at 817-560-9510 or email and we can provide accurate information regarding Free Shipping or any additional charges.
Shipping and delivery time given during the freight quote process is an estimated time of delivery given by the carrier. Choosing Liftgate Delivery may extend delivery times due to limited liftgate equipment at the delivering terminal. Meeting the delivery schedule is subject to the day the freight is shipped and the carrier’s ability to meet their schedule. Derek Weaver Co., Inc. does not guarantee that a carrier can meet their projected delivery time but we will provide you with the proper tracking information by email so you can follow the tracking time and arrange for special delivery needs with the carrier as needed. Any additional fees incurred as a result of consignee being unable to meet scheduled delivery time or cause for redelivery or reconsignment to a different location will be at consignee’s expense.
Choosing Residential may extend the estimated delivery time due limited liftgate trucks at the delivering terminal, additional communication and handling by the freight company. Please keep this in mind when choosing residential delivery.
UNLOADING THE FREIGHT TRUCK:
Make sure you can unload the freight. A forklift or lifting equipment is required for items over 800-lbs. The trucking company is only responsible for delivery to your loading dock if delivered to a business address or curbside if a residential lift gate delivery. Lift gate service is available for some equipment and can assist in unloading 2 and 4-post lifts however you will still need a forklift. Liftgate capacity is typically 1000-lbs and cannot unload a 2 or 4-post lift on its own.
PICKUP AT YOUR LOCAL FREIGHT TERMINAL:
If you are unable to unload a truck, we have the option of letting you pick the freight up at the closest terminal to your location. When picking up at a terminal, the freight company will load your truck or trailer for you which is included in the freight cost. Call our office (1-817-560-9510) to determine the location of the closest terminal. If you require terminal pickup please place a note in the comment box requesting terminal pickup and we will contact you with the terminal location. Covered trailers or trailers with ramps are not acceptable as they prevent the forklift from getting the load into the trailer. They will not drive onto a ramped trailer. Please remove the ramps prior to picking up if possible.
All shipments must be inspected immediately upon receipt
IF AN ITEM HAS FREIGHT DAMAGE OR SCRATCHES
1) ACCEPTING AN ITEM WITH FREIGHT DAMAGE OR SCRATCHES.
Choose this option if you have minor dings and scratches or a part that needs replaced to make the unit satisfactory. Make note of the damage before you sign the freight bill. You will be responsible for filing the freight damage claim with the carrier. Derek Weaver Co, Inc. will provide any replacement parts or touch up paint needed should you choose this option and the carrier should provide for reimbursement. If you have any questions or need further assistance, please call our customer service department @ 1-817-560-9510
2) REFUSE THE DAMAGED ITEM.
Choose this option if the carrier has severely damaged the freight beyond your judgment of a simple repair. Derek Weaver Co, Inc. will file all freight claims. Get a copy of the freight bill from the truck driver and email it with a brief explanation of the situation to us. A replacement will be shipped as soon as we verify possession of the freight with the carrier.
SCHEDULING A WAREHOUSE PICKUP
If you would like to pick-up the item at one or our warehouses, please call ahead to make sure the item is in stock and schedule your pick-up. Picking up at our warehouse will save you in freight fees but will require sales tax to be collected. If you do not see a pickup price on our website for the product you are interested in you may call our office for more information.
In Texas we load Monday – Friday by appointment only.
In North Carolina we load Monday – Friday by appointment only.
All Two Post and Four Post Lifts require trailer for pickup. Be prepared for pick-up by understanding the item’s weight and dimensions and using the proper truck and/or trailer for hauling. We cannot load open or enclosed trailers with ramp gates. Our warehouse will load the item onto your vehicle and/or trailer but is not responsible for properly securing the load on your vehicle and you will need to make sure you have the proper straps and equipment for hauling. All items for local pick-up are charged state sales tax at the appropriate local rate. If you have any questions or need further assistance, please call our customer service department @ 1-817-560-9510