#1 Best Seller Save Now!
- Swing arm style Manual mount/demount head
- Four pneumatic clamps and double acting cylinders, clamps up to 24"
- Side mounted bead breaker
- Powerful Bead Blaster seating inflation jets in clamping jaws
- Now with BLACK ARMOUR™ turntable protection.
- Lubricator, water separator and air pressure regulator
Which Weaver® Tire Changer is Right for you? (See chart below)
The only difference between the W-894XS and the W-898XS is the Clamping Range and Turntable Size.
*Note - Clamping ranges shown are not wheel sizes, they are clamp measurements. Outside clamping is the typical method used to protect nice wheels.
By adding the optional W-C-M-0400000 MC/ATV Adapters to a W-898XS it will open to 30" when clamping from the outside of the wheel. This means you could likely do most 28" wheels depending on the flange thickness and how that effects the overall diameter of the wheel.
By adding the optional W-C-M-0400000 MC/ATV Adapters to a W-894XS it will open to 26" when clamping from the outside of the wheel. This means you could likely do most 24" wheels depending on the flange thickness and how that effects the overall diameter of the wheel.
PRODUCT SPECS FOR W-C-M-0400000 MC/ATV ADAPTERS
- W-893 / 894 Series using inverted position: 7.5"-19"
- W-893 / 894 Series using reverted position: 14"-26"
- W-898 Series using inverted position: 10.25"- 23"
- W-898 Series using reverted position: 17"-30"
Note - The Bead Blaster will be out of position to assist seating the beads when using this adapter set.
- Powerful pneumatic assist arm tire changer that attaches to the W-894XS & W-898XS Tire Changers
- 4 powerful ways to press/lift the bead, two roller arms, one press block and one lifting disc
- Powerful pneumatic lifting disc is interchangeable with press block
- Provides effortless mounting and demounting of tough low profile and run flat tires
- Main Cylinder is equipped with a bead pressing block for pushing the bead into place
- Lifting Disc attaches to main cylinder for raising the bead into place
- Makes changing the toughest tires a one-man job
WARRANTY - All Weaver® Brand Wheel Balancers and Tire Changers carry a 1 Year Warranty. Our CE Certified Wheel Balancers and Tire Changers are NOT limited by this warranty and also carry a 1 Year Warranty on all Electronic Components. Weaver® Brand Wheel Balancers and Tire Changers are non-returnable/non refundable items. Warranty defects will be solved under the machine warranty. Beware of sellers who claim higher quality electrical components and yet will not warranty them beyond 90 days!
19 Reviews Hide Reviews Show Reviews
I have been using a rim clamp tire changer for several years. This unit with the assist arm makes it so easy to do low profile tires. It is supper quiet and very sturdily built. You won't be disappointed. I have a small shop, and work by myself. There is no need for help doing the big truck tires or low profiles. Shipping was supper fast. Thank You
I am impressed with the quality and it is built very sturdy i would recommend this tire machine.
The quality and strength of this machine for the money is unbelievable.
been in the repair business for over 50 years by far this is the best tire machine i ever owned
We use the machine for every thing. I do a lot of farm repairs on it like 10 16.5 and 12 16.5. I will be buying two more of them. Great machine for the money.
Tire machine is nice and quiet, no issues well worth the investment, tire assistance is game changer for me, instructions are not so great. But very easy to assemble!
We just received our tire changer and we are so happy it had no issues nothing missing or damaged machine is beautiful can't wait to use it .we are saving up for a balancer . thank you
Good machine. Has been able to handle everything I've thrown at it. Would be nice if it came with the plastic duck head. But it is available thru there website.
As good as machines that cost three times more!
I recently got my machine up and running. Just used it for the first time and was very impressed! I’ve used high dollar machines in the past and this unit does everything others will. What surprised me the most is how well it’s built. Keep in mind my machine it new and can’t give feedback on realibility. As always truck freight can be a pain to deal with as was the case here. Also this machine is used as a weekend toy and not in a shop. Very happy with Dereck Weaver and would not hesitate to buy from them again!
THE CHANGER WORKS GREAT AND THE ASSIST ARM IS AMUST FOR THE MONEY. THIS IS ALSO ONE HEAVY BUILT MACHINE. GREAT JOB GUYS!!!
The machine looks good, works great, and has all you need for low profile tires. The book lacks info about installation but there is a video on you tube that explains pretty well. That's why I only give it 4 stars.
I change motorcycle tire for friends & there friends some days I change 5 to 6 tires a day but I was changing them by hand this got old after a while so I saved my money and bought a tire changer w-894xs with assist arm what a wonderful machine ps I will probably live another 10 years if the good lord willing I can change tires all day long now thank to derek weaver
okay my opinion of this tire changer is easy to assemble , and work is silent and easy to operate . only take 2 hours to assemble and install the low profile tires is better and easier. thanks. derek weaver .
I bought the 894xs tire changer with assist arm. It was packaged extremely well in a wood box. Easy to assemble. I mounted some 18 inch low profile tires with ease. I didn't even need the assist arm yet.
the basic tire machine is fine, however the assist arm needs to have better assembly instructions and a video to show its setup and use. there is a video for the setup of the basic machine but not the assist arm. I am left to guess how to assemble the assist arm and try to scrutinize a cloudy picture of instructions written by a Chinese national with syntax dyslexia. I paid extra for liftgate delivery and it was supposed to arrive in something other than an 18 wheeler, but no luck.I had to meet the carrier at a nearby shopping mall and transfer the machine to my pickup truck to complete the delivery and struggle to unload the unit at my garage.The shipment was missing a protective cover for the bead breaker arm and I called and they said they would send it to me, but nothing yet. The company offers free delivery, but if you carefully scan the website you will find there are MANY exceptions to this claim. The shipping company was OLD DOMINION SHIPPING and they ignored the typed instructions from Derek Weaver personnel because I could clearly see their shipping instruction to the shipping company and they were ignored! All in all the experience was very frustrating.Why did I pay an extra 35 for power liftgate?
Derek Weaver Company is proud to offer our high quality products with free shipping or warehouse pickup. Here's how it works...
PRODUCTS MARKED FREE SHIPPING
All Products on our website are offered with "Free Shipping". This means the freight charges are included in the price. Most of our products weighing less than 800-lbs. are offered with “Absolute Free Shipping” which means there are no extra fees. In this case you will notice the phrase “FREE SHIPPING! Includes Free Residential and Free Lift Gate Service!”, in the description of the products page. Absolute Free Shipping also means there are no additional fees for Liftgate Service or Residential Delivery. The only additional fee that you may incur would be if the address were changed during shipment which would incur a reconsignment fee by the freight carrier that we would only pass on if it were not our mistake.
For equipment over 800-lbs (most 2 & 4-Post lifts) there are some limitations for Free Shipping depending on weight and delivery location. In this case you will notice the phrase “Free Shipping To Over 85% of the USA - See Where It's Free” in the description of the products page. Most of the USA will require no additional fee. This applies to over 85% of the continental USA (lower 48 states). Free shipping does not apply to Alaska or Hawaii. Some parts of the country are affected by higher freight rates due to the combination of weight and delivery location which will require a small additional charge to cover the higher rate charged by the freight carriers. Our shopping cart will not calculate the difference (added fee), so we will contact you if this is the case. Rather than advertise the higher rates across the board we choose to show the lowest possible cost to most of the country. Like “Absolute Free Shipping” there will be no extra charge for lift gate or residential delivery. The following areas may have additional freight: North Western US, North Eastern US, Long Island, Western Colorado, the Dakotas, some parts of Florida & California and any area deemed a remote location by the freight company. Prior to ordering give us a call at 817-560-9510 or email and we can provide accurate information regarding Free Shipping or any additional charges.
Shipping and delivery time given during the freight quote process is an estimated time of delivery given by the carrier. Choosing Liftgate Delivery may extend delivery times due to limited liftgate equipment at the delivering terminal. Meeting the delivery schedule is subject to the day the freight is shipped and the carrier’s ability to meet their schedule. Derek Weaver Co., Inc. does not guarantee that a carrier can meet their projected delivery time but we will provide you with the proper tracking information by email so you can follow the tracking time and arrange for special delivery needs with the carrier as needed. Any additional fees incurred as a result of consignee being unable to meet scheduled delivery time or cause for redelivery or reconsignment to a different location will be at consignee’s expense.
Choosing Residential may extend the estimated delivery time due limited liftgate trucks at the delivering terminal, additional communication and handling by the freight company. Please keep this in mind when choosing residential delivery.
UNLOADING THE FREIGHT TRUCK:
Make sure you can unload the freight. A forklift or lifting equipment is required for items over 800-lbs. The trucking company is only responsible for delivery to your loading dock if delivered to a business address or curbside if a residential lift gate delivery. Lift gate service is available for some equipment and can assist in unloading 2 and 4-post lifts however you will still need a forklift. Liftgate capacity is typically 1000-lbs and cannot unload a 2 or 4-post lift on its own.
PICKUP AT YOUR LOCAL FREIGHT TERMINAL:
If you are unable to unload a truck, we have the option of letting you pick the freight up at the closest terminal to your location. When picking up at a terminal, the freight company will load your truck or trailer for you which is included in the freight cost. Call our office (1-817-560-9510) to determine the location of the closest terminal. If you require terminal pickup please place a note in the comment box requesting terminal pickup and we will contact you with the terminal location. Covered trailers or trailers with ramps are not acceptable as they prevent the forklift from getting the load into the trailer. They will not drive onto a ramped trailer. Please remove the ramps prior to picking up if possible.
All shipments must be inspected immediately upon receipt
IF AN ITEM HAS FREIGHT DAMAGE OR SCRATCHES
1) ACCEPTING AN ITEM WITH FREIGHT DAMAGE OR SCRATCHES.
Choose this option if you have minor dings and scratches or a part that needs replaced to make the unit satisfactory. Make note of the damage before you sign the freight bill. You will be responsible for filing the freight damage claim with the carrier. Derek Weaver Co, Inc. will provide any replacement parts or touch up paint needed should you choose this option and the carrier should provide for reimbursement. If you have any questions or need further assistance, please call our customer service department @ 1-817-560-9510
2) REFUSE THE DAMAGED ITEM.
Choose this option if the carrier has severely damaged the freight beyond your judgment of a simple repair. Derek Weaver Co, Inc. will file all freight claims. Get a copy of the freight bill from the truck driver and email it with a brief explanation of the situation to us. A replacement will be shipped as soon as we verify possession of the freight with the carrier.
SCHEDULING A WAREHOUSE PICKUP
If you would like to pick-up the item at one or our warehouses, please call ahead to make sure the item is in stock and schedule your pick-up. Picking up at our warehouse will save you in freight fees but will require sales tax to be collected. If you do not see a pickup price on our website for the product you are interested in you may call our office for more information.
In Texas we load Monday – Friday by appointment only.
In North Carolina we load Monday – Friday by appointment only.
All Two Post and Four Post Lifts require trailer for pickup. Be prepared for pick-up by understanding the item’s weight and dimensions and using the proper truck and/or trailer for hauling. We cannot load open or enclosed trailers with ramp gates. Our warehouse will load the item onto your vehicle and/or trailer but is not responsible for properly securing the load on your vehicle and you will need to make sure you have the proper straps and equipment for hauling. All items for local pick-up are charged state sales tax at the appropriate local rate. If you have any questions or need further assistance, please call our customer service department @ 1-817-560-9510