Tire Changer / Wheel Balancer - Combo 1
Now with FREE Light Truck Cone Kit, $250.00 Value! Save Now on the Combo 1 - W-894XS Tire Changer and W-937-40 Wheel Balancer!
Buy the Combo Package and get both pieces at the best discount.
Be sure to note the Tire Changer has the powerful Bead Blaster included which is repeatedly left off of many competitors combos.
FREE SHIPPING! Includes Free Residential and Free Lift Gate Service!
- Swing arm style
- Automatic mount/demount up to 24" clamping range
- Four pneumatic clamps and double acting cylinders
- Side mounted bead breaker
- Powerful Bead Blaster seating inflation jets in clamping jaws
- Lubricator, water separator and air pressure regulator
Which Weaver® Tire Changer is Right for you? (See chart below)
The only difference between the W-894XS and the W-898XS is the Clamping Range and Turntable Size.
*Note - Clamping ranges shown are not wheel sizes, they are clamp measurements. Outside clamping is the typical method used to protect nice wheels.
By adding the optional W-C-M-0400000 MC/ATV Adapters to a W-898XS it will open to 30" when clamping from the outside of the wheel. This means you could likely do most 28" wheels depending on the flange thickness and how that effects the overall diameter of the wheel.
By adding the optional W-C-M-0400000 MC/ATV Adapters to a W-894XS it will open to 26" when clamping from the outside of the wheel. This means you could likely do most 24" wheels depending on the flange thickness and how that effects the overall diameter of the wheel.
PRODUCT SPECS FOR W-C-M-0400000 MC/ATV ADAPTERS
- W-893 / 894 Series using inverted position: 7.5"-19"
- W-893 / 894 Series using reverted position: 14"-26"
- W-898 Series using inverted position: 10.25"- 23"
- W-898 Series using reverted position: 17"-30"
Note - The Bead Blaster will be out of position to assist seating the beads when using this adapter set.
- Self calibrating
- Weight storage
- Pegs for accessories
- 8" long shaft with 40mm diameter
- 4 centering cones
- ST, AL1, AL2, AL3 balancing methods
- Speed nut, hammer and caliper standard
- No Hood - Low Speed Technology
- Accurate to 1 gram
- Optional Motorcycle Kit available
Which Weaver® Wheel Balancer is Right for you? (See chart below)
The W-937-40 and W-957-40 share the same software, the main difference being the space requirement.
Note - Some offset and dually wheels will require our truck cone kit, which includes the back cone spacer cup and the large cone for center holes up to 6 7/8". The W-937 and W-957 Wheel Balancers with 36 mm. shafts use the W-TKD 36mm Truck Cone Kit, and the W-937-40 / W-957-40 / W-977 with 40 mm. shafts use the W-TKD 40mm.
WARRANTY - All Weaver® Brand Wheel Balancers and Tire Changers carry a 1 Year Warranty. Our CE Certified Wheel Balancers and Tire Changers are NOT limited by this warranty and also carry a 1 Year Warranty on all Electronic Components. Weaver® Brand Wheel Balancers and Tire Changers are non-returnable/non refundable items. Warranty defects will be solved under the machine warranty. Beware of sellers who claim higher quality electrical components and yet will not warranty them beyond 90 days!
44 Reviews Hide Reviews Show Reviews
The instructions were only video instructions. I would have preferred written. Overall pleased with the product.
good investment good equipment does the job
Very nice equipment would highly recommend very heavy duty need a direct shipping company. Had nothing but problems had to go pick up my own equipment at there terminal
Both machines work great. Shipping was good arrived with no damage and was easy to set up
The combo has already saved us so much time and money just in the first week and will probably start making us money now that people know we have them they only took us 30 min to have them uncreated and setup nice working machines
Works as advertised. Easy to set up. Have balanced 7 tires so far without any issue. The only negative would be if the service manual was a little more detailed.
This combo set is great. Shipping was fast and the tailgate delivery worked great through a great carrier. All packages were in very good condition and well packed. The changer works flawlessly and smooth. The instructions are great on both units and the online tutorial works well. Still haven't used the balancer but I don't anticipate an issue as it was very easy to calibrate.
This set came packaged extremely well. Set up was a snap. I began using both machines within 10 minutes after setup was completed. The instruction manuals were easy to follow and concise. I gave this five stars because it is a great value for what you get!
Both the tire machine and wheel balancer seem well built and worked well right out of the box. Very happy with them so far. The only negative is the manual wasn't very easy to understand. Your videos are top notch and were valuable on the set up and operation of both machines.
No complaints very good machines and very good people to work with
We were fed up with dealing with local tire shops taking all day, damaging wheels, and losing tools. It took us a couple tire swaps to get the hang of it, but now these machines make changing and balancing tires a breeze. We only use them once or twice a week, but they seem to be made well enough for daily use in a professional shop. If you're thinking about buying these tools, just do it. You won't regret the investment, and you'll love how handy they are.
This is the perfect setup for my garage and what I needed. Changing tires on my truck and trailer every few months, this comes in handy.
Ordering, shipping notification and delivery were very good. I just changed the first tire. Was an old rusted rim and junk tire off a log splitter. Tire changer did a nice job. Would recommend to anyone. Thanks Derek Weaver!
When it was time to add more equipment to the shop after being very happy with the first set I ordered about 7 years ago the only choice I would make was another set from Derek Weaver. The original set still held up like the day i got them , so why buy anything else. I highly recommend these. Great value , great products , and fast shipping. Thanks again Derek Weaver for another great shop addition!!!!!
Well worth the 2 years of saving up for. I bought this in a combo with the W937 balancer, and added the power assist arm. Couldn’t be happier. Easy to set up by following the videos, easy to use too. Even better yet was finding out my Porter Cable pancake compressor is adequate enough to run it!
Both the Tire Changer and Wheel Balancer are better than expected. Very sturdy and made with quality. Probably the best value purchase I've made in a long time. Items were well crated and delivery was excellent, I was able to track the items right to my door.
I am impressed, good folks there at Derek Weaver.
Hooked up with no issues. Everything was with the package for quick and easy install. *Note: the shipping company did stack something on the package, so package was damaged and item was visible. But item was not damaged
Look around for some used but good equipment with not much luck. Researched several new options and went with Derek Weaver after reading reviews, I also called them too asking many difficult questions, which they answered. Have been very happy with this purchase
This equipment is legit. It is extremely solid and mounted/balanced my first set of four tires flawlessly. I bought the changer and balancer for light home use so I did not want to drop 10K, but I can honestly not tell the difference. Highly recommended!
Great set up , added the other piece for the low profile wheels and everything works great.
I have done lots of tires, I purchased combo number 1 for my personal shop, just did my first tire, it was a 35-12.50.18 from a 2500 Ram, I had a bent rim, I dismounted the tire, mounted and balanced the tire on the new rim. The tire machine worked great! I am very impressed! Then I put it on the balancer, it worked great, probably the biggest tire I will do was my first, 100% ! I am so pleased with the performance, quality and price, 100% satisfied!
Very happy with purchase assembly was easy and everything works great. Right after installing my son and I removed tires from a bunch of wheels we had laying around shop. Some had been mounted for years and they were quickly removed using the weaver machine. Balance is easy to use after initial setup and calibration. Very satisfied customer.
I have used the tire changer and balancer numerous times since purchasing 3 weeks ago. Everything has worked excellent so far!
I recently bought a combo 1. It shipped fast, works great. I called many times with questions and they patiently answered them and helped me make a decision.
Quick shipping. Setup was relatively easy. Have mounted and balanced a few tires so far. No issues. The balancer seemed to do it job and was verified via a high speed road test. Looking forward to many years of service.
Did a lot of research, thought this was the best deal out there. Used several times already with flawless operation. Very happy with the pleasant transaction, machines work great, tailgate delivery was easy to deal with, absolutely no complaints!
I've only done one set of tires so far but looking forward to many years of changes ahead. We have many vehicles and one race car and end up spending a lot of time and money getting these all changed and balanced. My race tires have a pretty stiff sidewall but had no problem changing these with this combo. Balancing aluminum wheels with stick on weights is a breeze. Thanks.
I am impressed with the quality even better then I imagined! Also like the how to videos they provide very helpful!
Great product for the price. Would definitely recommend to anyone who doesn't want to spend a ton of money. I have done small tires like on a side by side all the way up to 20 inch wheels. Thanks for the great product.
After some research we selected the Weaver Combo 1. For our need it is the best value. We expect to mount about 30-50 sets of tires per year on light trucks. So far, so good. It worked well up to the 20" as well with 33" tires.
So far changed three sets of tires , changer and balancer both seem to work great, very satisfied with my purchase just wish I would've got them years ago
So far I've done my 15-inch steel wheels my 31 inch truck tires and my 18 inch aluminum low Pros and it's handled them well. I would recommend getting the power assist arm, which I plan on purchasing in the future, for Low Pro Tires however with patience and enough tire lube it wasn't bad. I had a little trouble getting the truck tires mounted straight on the balancer but once I got the technique down it was easy. I've also rebalanced a set of tires on my daily driver and even though this balancer is on the cheaper side it still rides a lot smoother than it did before because I can take my time and make sure it's right. I went to Walmart and bought the cheapest 15-inch steel wheel and tire that they had just to use for the calibration process and it worked flawlessly. With the three sets of wheels that I've done already it's saved me upwards of $300, the machines will pay for themselves in no time. I track my car so I'm always flipping the tires on the rim so they wear evenly on the inside and outside and up until now it's cost me $120 a pop just to have them switched. Not to mention the increased longevity of the tire. Setup was easy it basically consists of installing the tower and the air lines. The balance is pretty light and easily moved around but the tire machine is incredibly heavy especially after the tower is installed so you'll need two people to move it. Nothing on the machines seems flimsy.
both units work flawlessly. 5 sets of tires so far and no problems
easy set up and ready to use great price i'd recommend these machines for anyone from beginner at home or a shop that does only tire work i'm very satisfied
Machine is just as specified, works great w/ no problems...ordered one a year ago and have had no issues...changed nearly 9000 tires with it and still going strong...exellent value. I liked it enough to order a second one two weeks ago.
The items shipped fast. They were packed well and not damaged in transit. Set up was simple & straight forward. I used this machine once to do 4 tires. Static balanced them perfectly. Online instructions & videos for set up & calibration of the balancer were very helpful. I cannot review longevity yet but parts availability was a major factor in this purchase.
This is top quality machines, equal to coats machine we replaced. Much better price.
Surprised how well they work ... Perfect! !!!
This is a nice tire machine and balancer works great.
So far I've been happy with the performance of these products.
We bought 5 of these sets and use them in different locations and have no complaints.
(¯`••**•๑۩۞۩๑ - Super Fast Shipping ๑۩۞۩๑•**••´¯)
great items,not a scratch,excellent crating,extremley happy,thank you,,A+A+A+A+
Derek Weaver Company is proud to offer our high quality products with free shipping or warehouse pickup. Here's how it works...
PRODUCTS MARKED FREE SHIPPING
All Products on our website are offered with "Free Shipping". This means the freight charges are included in the price. Most of our products weighing less than 800-lbs. are offered with “Absolute Free Shipping” which means there are no extra fees. In this case you will notice the phrase “FREE SHIPPING! Includes Free Residential and Free Lift Gate Service!”, in the description of the products page. Absolute Free Shipping also means there are no additional fees for Liftgate Service or Residential Delivery. The only additional fee that you may incur would be if the address were changed during shipment which would incur a reconsignment fee by the freight carrier that we would only pass on if it were not our mistake.
For equipment over 800-lbs (most 2 & 4-Post lifts) there are some limitations for Free Shipping depending on weight and delivery location. In this case you will notice the phrase “Free Shipping To Over 85% of the USA - See Where It's Free” in the description of the products page. Most of the USA will require no additional fee. This applies to over 85% of the continental USA (lower 48 states). Free shipping does not apply to Alaska or Hawaii. Some parts of the country are affected by higher freight rates due to the combination of weight and delivery location which will require a small additional charge to cover the higher rate charged by the freight carriers. Our shopping cart will not calculate the difference (added fee), so we will contact you if this is the case. Rather than advertise the higher rates across the board we choose to show the lowest possible cost to most of the country. Like “Absolute Free Shipping” there will be no extra charge for lift gate or residential delivery. The following areas may have additional freight: North Western US, North Eastern US, Long Island, Western Colorado, the Dakotas, some parts of Florida & California and any area deemed a remote location by the freight company. Prior to ordering give us a call at 817-560-9510 or email and we can provide accurate information regarding Free Shipping or any additional charges.
Shipping and delivery time given during the freight quote process is an estimated time of delivery given by the carrier. Choosing Liftgate Delivery may extend delivery times due to limited liftgate equipment at the delivering terminal. Meeting the delivery schedule is subject to the day the freight is shipped and the carrier’s ability to meet their schedule. Derek Weaver Co., Inc. does not guarantee that a carrier can meet their projected delivery time but we will provide you with the proper tracking information by email so you can follow the tracking time and arrange for special delivery needs with the carrier as needed. Any additional fees incurred as a result of consignee being unable to meet scheduled delivery time or cause for redelivery or reconsignment to a different location will be at consignee’s expense.
Choosing Residential may extend the estimated delivery time due limited liftgate trucks at the delivering terminal, additional communication and handling by the freight company. Please keep this in mind when choosing residential delivery.
UNLOADING THE FREIGHT TRUCK:
Make sure you can unload the freight. A forklift or lifting equipment is required for items over 800-lbs. The trucking company is only responsible for delivery to your loading dock if delivered to a business address or curbside if a residential lift gate delivery. Lift gate service is available for some equipment and can assist in unloading 2 and 4-post lifts however you will still need a forklift. Liftgate capacity is typically 1000-lbs and cannot unload a 2 or 4-post lift on its own.
PICKUP AT YOUR LOCAL FREIGHT TERMINAL:
If you are unable to unload a truck, we have the option of letting you pick the freight up at the closest terminal to your location. When picking up at a terminal, the freight company will load your truck or trailer for you which is included in the freight cost. Call our office (1-817-560-9510) to determine the location of the closest terminal. If you require terminal pickup please place a note in the comment box requesting terminal pickup and we will contact you with the terminal location. Covered trailers or trailers with ramps are not acceptable as they prevent the forklift from getting the load into the trailer. They will not drive onto a ramped trailer. Please remove the ramps prior to picking up if possible.
All shipments must be inspected immediately upon receipt
IF AN ITEM HAS FREIGHT DAMAGE OR SCRATCHES
1) ACCEPTING AN ITEM WITH FREIGHT DAMAGE OR SCRATCHES.
Choose this option if you have minor dings and scratches or a part that needs replaced to make the unit satisfactory. Make note of the damage before you sign the freight bill. You will be responsible for filing the freight damage claim with the carrier. Derek Weaver Co, Inc. will provide any replacement parts or touch up paint needed should you choose this option and the carrier should provide for reimbursement. If you have any questions or need further assistance, please call our customer service department @ 1-817-560-9510
2) REFUSE THE DAMAGED ITEM.
Choose this option if the carrier has severely damaged the freight beyond your judgment of a simple repair. Derek Weaver Co, Inc. will file all freight claims. Get a copy of the freight bill from the truck driver and email it with a brief explanation of the situation to us. A replacement will be shipped as soon as we verify possession of the freight with the carrier.
SCHEDULING A WAREHOUSE PICKUP
If you would like to pick-up the item at one or our warehouses, please call ahead to make sure the item is in stock and schedule your pick-up. Picking up at our warehouse will save you in freight fees but will require sales tax to be collected. If you do not see a pickup price on our website for the product you are interested in you may call our office for more information.
In Texas we load Monday – Friday by appointment only.
In North Carolina we load Monday – Friday by appointment only.
All Two Post and Four Post Lifts require trailer for pickup. Be prepared for pick-up by understanding the item’s weight and dimensions and using the proper truck and/or trailer for hauling. We cannot load open or enclosed trailers with ramp gates. Our warehouse will load the item onto your vehicle and/or trailer but is not responsible for properly securing the load on your vehicle and you will need to make sure you have the proper straps and equipment for hauling. All items for local pick-up are charged state sales tax at the appropriate local rate. If you have any questions or need further assistance, please call our customer service department @ 1-817-560-9510