Tire Changer / Wheel Balancer - Combo 3
Now with FREE Light Truck Cone Kit, $250.00 Value! Save Now on the Combo 3 - W-898XS Tire Changer and W-937-40 Wheel Balancer!
Buy the Combo Package and get both pieces at the best discount.
Be sure to note the Tire Changer has the powerful Bead Blaster included which is repeatedly left off of many competitors combos.
FREE SHIPPING! Includes Free Residential and Free Lift Gate Service!
- Swing arm design
- Mount/Demount up to 28" clamping with widths up to 15"
- Four pneumatic clamps and double acting cylinders
- Side mounted bead breaker
- Bead seating inflation jets in clamping jaws
- No scratching - machine never contacts rim
- Lubricator, water separator and air pressure regulator
- 26" x 26" square turntable that can accommodate wheel clamping up to 28"
Which Weaver® Tire Changer is Right for you? (See chart below)
The only difference between the W-894XS and the W-898XS is the Clamping Range and Turntable Size.
By adding the optional W-C-M-0400000 MC/ATV Adapters to a W-898XS it will open to 30" when clamping from the outside of the wheel. This means you could likely do most 28" wheels depending on the flange thickness and how that effects the overall diameter of the wheel.
By adding the optional W-C-M-0400000 MC/ATV Adapters to a W-894XS it will open to 26" when clamping from the outside of the wheel. This means you could likely do most 24" wheels depending on the flange thickness and how that effects the overall diameter of the wheel.
PRODUCT SPECS FOR W-C-M-0400000 MC/ATV ADAPTERS
- W-893 / 894 Series using inverted position: 7.5"-19"
- W-893 / 894 Series using reverted position: 14"-26"
- W-898 Series using inverted position:10.25"- 23"
- W-898 Series using reverted position: 17"-30"
Note - The Bead Blaster will be out of position to assist seating the beads when using this adapter set.
- Self calibrating
- Weight storage
- Pegs for accessories
- 8" long shaft with 40mm diameter
- 4 centering cones
- ST, AL1, AL2, AL3 balancing methods
- Speed nut, hammer and caliper standard
- No Hood - Low Speed Technology
- Accurate to 1 gram
- Optional Motorcycle Kit available
Which Weaver® Wheel Balancer is Right for you? (See chart below)
The W-937-40 and W-957-40 share the same software, the main difference being the space requirement.
Note - Some offset and dually wheels will require our truck cone kit, which includes the back cone spacer cup and the large cone for center holes up to 6 7/8". The W-937 and W-957 Wheel Balancers with 36 mm. shafts use the W-TKD 36mm Truck Cone Kit, and the W-937-40 / W-957-40 / W-977 with 40 mm. shafts use the W-TKD 40mm.
11 Reviews Hide Reviews Show Reviews
I'm very impressed with this tire changer and balancer combo for the price. The tire changer is close to the quality of a Coats tire changer but at a much lower price. The balancer does a perfect tire balance. The only small thing I don't like is the bucket for the tire slick. I purchased a good bucket to mount on mine. Like many other reviewers, I purchased these for my personal use. At the price, why not. I'm glad that I did! They are a nice convenience.
I ordered the combo 3 set up for the versatility it offers and the wheel size it can mount. With the motorcycle adapter I can mount up to a 30in motorcycle wheel. I ordered it on a Saturday and it was delivered on the following Friday the shipping was great the driver backed the semi right up to my garage door and with the lift gate service was able to place the unit's right where I wanted them. The changer works fantastic and the balancer is spot on accurate, after setup. My wife's car had a bad vibration from out of balance wheels so I set up the balancer with a good wheel from another vehicle and proceeded to balance the wife's car two balanced fine the other two wheels had so much weight on them I had to dis mount the tire and flip it on the rims then they balanced out good i put them back on the car and it was night and day difference in ride, so I know 100% the balancer works great. Haven't had to use the bead blast yet but It seems like it will work well. I worked at Sears tire center years ago and these units feel like they did back then I've had them about a month now and made around $300 so far.
Very good machine easy to use perfect for my shop
Before purchase I read all the reviews with none being negative. This prompted me to make the purchase. So far I've been very happy with my decision. I would surly recommend these machines.
the tire changer seems to have plenty of power and is very smooth..wheel balancer has been tested against several high dollar balancer and is dead on with them
I read all the reviews before buying the comb 3, It got delivered on scheduled. It took about 3 weeks before I could check it out, but I'm very pleased with everything. I watched all the video's they were a lot of help. It's
priced very reasonable. I would recommend the assist arm, as the first tire I done was a low profile, as always I ruined the rim glad it wasn't a real good one LOL.
Hi, i am very happy with my wheel balancer and tire changer that i purchased from Derek Weaver. I like how they work, and how easy they make the job of changing tires. I would recommend Derek Weaver products to anyone that wants a quality product at a reasonable price.
I am very happy with the tire changer and wheel balancer that I have purchased from you, I bought it with a reconditioned from a friend of mine who bought his combo four years ago and loves his. I hope to get a lot of use out of my combo #3.
Was a slight delay in shipping but the Staff at Derrick Weaver contacted me ASAP and explained. Delay was no biggie wasn't ready to install on my end any way. Called the day it was shipped SUPER FAST. Freight Company was even very friendly and super helpful. Equipment arrived in perfect condition and greatly exceeded my expectations can't wait to use. Super easy to set up. Instructions were lacking but a little common sense and who reads them anyway LOL. Videos were helpful.
Will be buying equipment from them again.
I found the product easy to assemble and set up.
The instructions were not as clear as I would have liked. I went on U tube to understand how they units work. A video would be extremely helpful in understanding how to safely use the equipment.
First of all, I could never figure out why people want so much money for a machine that has some air controls and a device that turns (turntable). This cant be expensive rocket science. Well, once I started checking in you guys product, I think you guys understand this. So we purchased combo unit & even with bad weather in Houston area, still delivered in 2 days to Southern Illinois. Arrived great, even with free shipping & lift gate service free. Set up was real easy after watching video. Really, the videos was parts of my reason to purchase. Video showed internals of tire machine, & I thought its looked good & heavy duty. We didnt have it set up for a half hour & we where banging out tires and it performs just fine. I am excited about this purchase, customer service upon ordering was great....hint..if your bank has credit card limits on your card, call them to increase before you order...it might save you a day!!!. overall everything about this was great & are extremely satisfied.
Derek Weaver Company is proud to offer our high quality products with free shipping or warehouse pickup. Here's how it works...
PRODUCTS MARKED FREE SHIPPING
All Products on our website are offered with "Free Shipping". This means the freight charges are included in the price. Most of our products weighing less than 800-lbs. are offered with “Absolute Free Shipping” which means there are no extra fees. In this case you will notice the phrase “FREE SHIPPING! Includes Free Residential and Free Lift Gate Service!”, in the description of the products page. Absolute Free Shipping also means there are no additional fees for Liftgate Service or Residential Delivery. The only additional fee that you may incur would be if the address were changed during shipment which would incur a reconsignment fee by the freight carrier that we would only pass on if it were not our mistake.
For equipment over 800-lbs (most 2 & 4-Post lifts) there are some limitations for Free Shipping depending on weight and delivery location. In this case you will notice the phrase “Free Shipping To Over 85% of the USA - See Where It's Free” in the description of the products page. Most of the USA will require no additional fee. This applies to over 85% of the continental USA (lower 48 states). Free shipping does not apply to Alaska or Hawaii. Some parts of the country are affected by higher freight rates due to the combination of weight and delivery location which will require a small additional charge to cover the higher rate charged by the freight carriers. Our shopping cart will not calculate the difference (added fee), so we will contact you if this is the case. Rather than advertise the higher rates across the board we choose to show the lowest possible cost to most of the country. Like “Absolute Free Shipping” there will be no extra charge for lift gate or residential delivery. The following areas may have additional freight: North Western US, North Eastern US, Long Island, Western Colorado, the Dakotas, some parts of Florida & California and any area deemed a remote location by the freight company. Prior to ordering give us a call at 817-560-9510 or email and we can provide accurate information regarding Free Shipping or any additional charges.
Shipping and delivery time given during the freight quote process is an estimated time of delivery given by the carrier. Choosing Liftgate Delivery may extend delivery times due to limited liftgate equipment at the delivering terminal. Meeting the delivery schedule is subject to the day the freight is shipped and the carrier’s ability to meet their schedule. Derek Weaver Co., Inc. does not guarantee that a carrier can meet their projected delivery time but we will provide you with the proper tracking information by email so you can follow the tracking time and arrange for special delivery needs with the carrier as needed. Any additional fees incurred as a result of consignee being unable to meet scheduled delivery time or cause for redelivery or reconsignment to a different location will be at consignee’s expense.
Choosing Residential may extend the estimated delivery time due limited liftgate trucks at the delivering terminal, additional communication and handling by the freight company. Please keep this in mind when choosing residential delivery.
UNLOADING THE FREIGHT TRUCK:
Make sure you can unload the freight. A forklift or lifting equipment is required for items over 800-lbs. The trucking company is only responsible for delivery to your loading dock if delivered to a business address or curbside if a residential lift gate delivery. Lift gate service is available for some equipment and can assist in unloading 2 and 4-post lifts however you will still need a forklift. Liftgate capacity is typically 1000-lbs and cannot unload a 2 or 4-post lift on its own.
PICKUP AT YOUR LOCAL FREIGHT TERMINAL:
If you are unable to unload a truck, we have the option of letting you pick the freight up at the closest terminal to your location. When picking up at a terminal, the freight company will load your truck or trailer for you which is included in the freight cost. Call our office (1-817-560-9510) to determine the location of the closest terminal. If you require terminal pickup please place a note in the comment box requesting terminal pickup and we will contact you with the terminal location. Covered trailers or trailers with ramps are not acceptable as they prevent the forklift from getting the load into the trailer. They will not drive onto a ramped trailer. Please remove the ramps prior to picking up if possible.
All shipments must be inspected immediately upon receipt
IF AN ITEM HAS FREIGHT DAMAGE OR SCRATCHES
1) ACCEPTING AN ITEM WITH FREIGHT DAMAGE OR SCRATCHES.
Choose this option if you have minor dings and scratches or a part that needs replaced to make the unit satisfactory. Make note of the damage before you sign the freight bill. You will be responsible for filing the freight damage claim with the carrier. Derek Weaver Co, Inc. will provide any replacement parts or touch up paint needed should you choose this option and the carrier should provide for reimbursement. If you have any questions or need further assistance, please call our customer service department @ 1-817-560-9510
2) REFUSE THE DAMAGED ITEM.
Choose this option if the carrier has severely damaged the freight beyond your judgment of a simple repair. Derek Weaver Co, Inc. will file all freight claims. Get a copy of the freight bill from the truck driver and email it with a brief explanation of the situation to us. A replacement will be shipped as soon as we verify possession of the freight with the carrier.
SCHEDULING A WAREHOUSE PICKUP
If you would like to pick-up the item at one or our warehouses, please call ahead to make sure the item is in stock and schedule your pick-up. Picking up at our warehouse will save you in freight fees but will require sales tax to be collected. If you do not see a pickup price on our website for the product you are interested in you may call our office for more information.
In Texas we load Monday – Friday by appointment only.
In North Carolina we load Monday – Friday by appointment only.
All Two Post and Four Post Lifts require trailer for pickup. Be prepared for pick-up by understanding the item’s weight and dimensions and using the proper truck and/or trailer for hauling. We cannot load open or enclosed trailers with ramp gates. Our warehouse will load the item onto your vehicle and/or trailer but is not responsible for properly securing the load on your vehicle and you will need to make sure you have the proper straps and equipment for hauling. All items for local pick-up are charged state sales tax at the appropriate local rate. If you have any questions or need further assistance, please call our customer service department @ 1-817-560-9510